Buying the right oil filter: Tips and tricks for the average car owners

During car service, one of the most important parts that should be maintained is the engine. It’s expensive to replace, even to repair, that’s why manufacturer-approved repair shops or dealers always put oil filters to secure it. Don’t mistake its size as a representation of its significance – although small,

4x4 Oil Filters

play an important role in keeping your engine’s life cycle through many ways.

4×4 oil filters filter dust and debris from entering before circulating it back to your engine. But when improperly maintained, contaminants like dust, debris, and small animals’ faecal matter can enter.

How do you maintain your oil filter’s capacity in protecting the engine? There are two ways: replacing a malfunctioning filter on your own or sending it to service. If you choose the former, well there are things you must know, first. One of them is that choosing replacement filters such as 4×4 oil filters can be quite challenging especially if you don’t have the proper information.

To know how to alleviate your oil filter’s condition, here are some tips and a checklist of car parts that need to be checked before you buy 4×4 oil filters Australia has these days:

Match the old with the new—holes, gaskets, and threads

The first thing you need to do is to make sure your new filter’s hole is the same size as your old one. You can check this by looking at the bottom. If they have the same diameter, then you’re good to go.

Next, make sure the threads are matched, as what the Society of Automotive Engineering (SAE) standard have indicated.

Lastly, position the gasket similar to your old filter’s positioning. If you don’t make sure that the old and new ones match, it will lead to oil leaks which will eventually escalate to grave mechanical problems.

Have a safety feature like a Bypass Valve

When oil filters are clogged, a bypass valve still lets oil permeate through the filter until it reaches the important areas engine for lubrication. Make sure you buy an oil filter that possesses this feature.

Go for High Micron Rating

The micron rating indicates the filter’s ability to block contaminants from the oil according to particle size. If you want an effective oil filter, check the micron rating if it’s above average—the higher, the better.

Bank on the membrane.

Provide more than a 40-50% of extra surface that its membrane can use. But before that, check what it’s made from—is it cellulose, synthetic, or glass fibre? This matters as oil movement will be affected by the type of the membrane material and its filtering capabilities.

Opt for an Anti-Drainback Valve

Your new oil filter should include an anti-drain back valve, which restricts oil from draining when your car’s engine is not in use. You will have a better oil pressure once you use your engine again, enabling the oil to reach the significant engine parts as soon as possible. This also prevents further damage from friction.

Choose heavy filters over lighter ones

Since heavier filters have more filter medium present inside, they do not clog easily compared to the lighter 4×4 oil filters in Australia these days.

It doesn’t matter what vehicle you have, engines and oil filters have to be properly maintained. Through the tips and ideas presented above, now you have a clue on what to consider before buying oil filters.

Remember, the right oil filter is durable and efficient with engines, not the other way around. If you’re looking for quality oil filters, you may visit https://www.westernfilters.net.au/4×4-air-oil-fuel-filter-servicing-kit-for-foton-tunland-aumark-2-8l-diesel-engs/

 

Leave a Reply

Your email address will not be published. Required fields are marked *